Products Catalogue

Contact Us

Tel: +86 0755-86420888

Fax: +86 0755-86420888


Add: Room 7C,Block B,XianDaiZhiChuang Building,HuaQiangBei Road,FuTian Distirct,ShenZhen,China

HOME  »  News  »  Industry news

iPhone 6 Apple's 2014 iPhone design

Sources: 本站   Click:   Date: 2014-5-2

iPhone 6

Apple's 2014 iPhone

What We Expect 

View real products

Rumors about the next generation iPhone have been accelerating in recent weeks. The majority of iPhone 6 rumors have focused on the screen size of the device, which is expected to increase. The size of the iPhone's display grew from 3.5 inches to 4 inches with the iPhone 5, and with the next generation iPhone, the screen will grow even larger.

Apple has been experimenting with a wide variety of screen sizes, with the most consistent rumors suggesting a range of 4.7 inches and 5.5 inches, bringing the next iPhone in line with competing Android and Windows phones that have all adopted larger displays.

Apple even acknowledged in an internal presentation that consumers want phones with larger displays. Based on that evidence, it seems pretty clear the company is planning to address the segment of market that desires larger phones.

Apple is expected to release the 4.7-inch iPhone 6 around September of 2014, while the 5.5-inch version might not be available until the very end of the year or early 2015.

The iPhone 6 may also feature a durable sapphire display in at least some models for the first time, and rumors have indicated the larger iPhones may adopt slimmer bezels and a thinner chassis.

In a recent video, an iPhone 6 case obtained from a supplier in Asia was compared to a fifth-generation iPod touch, demonstrating that the iPod touch fit flush within the case. This suggests the iPhone 6 will be significantly thinner than the current iPhone 5s, possibly between 6mm and 7mm. The existing iPhone 5s has a thickness of 7.6mm, while the iPod touch measures in at 6.1mm.

In More Detail

Hints of a larger iPhone first surfaced way back in December 2012, when an analyst noted the existence of iPhone 6 prototypes with a screen size of 4.8 inches. Then in January 2013, a sketchy rumor suggested Apple would debut a 4.8-inch "iPhone Math" alongside the iPhone 5s, and for short period of time, larger-screened iPhone rumors became attached to the iPhone 5s and a 2013 release, with initial rumorsindicating Apple would launch both a smaller and a larger iPhone in 2013.

In February, larger iPhone rumors shifted from the iPhone 5s and solidified around the iPhone 6, which would not launch until 2014. It became clear that Apple's 2013 focus was a less expensive iPhone to go alongside its standard flagship offering, while 2014 development would center around a bigger display.

As focus shifted towards the lower cost iPhone, rumors of the larger iPhone 6 died down until June 2013, when Reuters reported Apple was testing 4.7 and 5.7 inch displays for two iPhones to be released in 2014. A July report from The Wall Street Journal confirmed that Apple was indeed looking into larger-screened prototypes for its next-generation iPhone.

In November 2013, Bloomberg also pointed to two iPhone releases in 2014, one with a 4.7-inch display and another with a 5.5-inch display. Notably, the site suggested the iPhones would incorporate larger displays with glass that curves "downward at the edges." While The Wall Street Journal has since refuted the claim suggesting a curved display for the next-generation iPhone, it has also pointed to a dual-iPhone lineup.


Rumors about the screen size of the next iPhone have varied quite a bit as Apple is reportedly testing a variety of different prototypes. All of the reports have indicated a size ranging from 4.7 to 5.7 inches, but have most consistently pointed to two distinct models: 4.7" and 5.5".

It is likely that introducing an iPhone in the range of 4.7 to 5.5 inches will involve increasing the resolution of the display, which will require developers to create new images and assets for their apps. When Apple switched from the iPhone 4's 960x640 display to the larger 1136x640 display in the iPhone 5, it was the first time Apple had changed the screen size on the phone since its 2007 launch.

Apple has been notably cautious about introducing new resolutions in order to minimize device fragmentation for app developers, but an increase in pixel count may be the only way for the company to introduce a much larger phone while retaining a Retina-quality display.

A report from DisplaySearch, which tapped sources in the display supply chain to analyze panel sizes and resolutions currently under development, suggested that Apple could be exploring a 4.7-inch 1600x900 with a 386 ppi screen and/or a 5.5-inch 1920x1080 with a 401 ppi screen.

But more recently, a reliable analyst predicted a 1334x750 (326 PPI) screen for the 4.7" model and a 1920x1080 (401ppi) screen for the 5.5" model.

We explored the feasibility of an 1334x750 4.7-inch iPhone with a pixel density of 326 as predicted by Kuo in a recent post, finding that Apple could use the same exact icons that it uses now on a larger display, simply adding more space to fill the screen.

                                       4-inch home screen (left) vs 4.7-inch home screen (right)

Existing unoptimized apps, meanwhile, could function in a "letterbox" style with black borders for unused screen space, ensuring that apps would continue to work on a larger-screened phone as developers worked to update them for the new display size.

                     Unoptimized app compared to app optimized for a 4.7-inch display. Mockup by The Verge forum user Pi is exactly 3


Current iPhones use Low Temperature Poly Silicon (LTPS) technology, and Apple is likely to continue using that technology for the iPhone 6.

With the iPad Air and Retina iPad mini, Apple adopted Indium Gallium Zinc Oxide (IGZO) technology in order to create thinner displays that draw less power than seen with the amorphous silicon (a-Si) displays used on previous models, but LTPS already offers better electron mobility than IGZO and thus Apple will almost certainly continue using LTPS in its smaller iOS devices for the time being.


Apple currently uses durable and damage resistant Corning Gorilla Glass for its iPhones, but reports have suggested that the company could switch to sapphire crystal for future displays.

Sapphire crystal, which is used for small iPhone elements like the camera lens and the home button of the 5s, has historically been prohibitively expensive to produce in larger quantities, but Apple has recently partnered  with GT Advanced to ramp up sapphire production.

With GT Advanced's technology and Apple's investment, it is possible that the company will be able to produce much larger quantities of sapphire crystal at a far lower cost, which could see Apple incorporating it into next generation devices.

In January of 2014, documents filed with the Foreign-Trade Zone Board indicated that Apple was seeking an "aggressive go-live timeline" for the launch of the sapphire plant in order to begin work on a "critical new sub-component" for Apple devices. While it's unclear what product the sub-component refers to, it could potentially be a sapphire crystal display for the iPhone 6.

During a February 2014 shareholders meeting, Apple CEO Tim Cook indicated the company's sapphire production facility was for a "secret project" he could not talk about, possibly hinting at an iPhone model with an ultra-durable sapphire screen.

Apple has reportedly begun a trial run for an iPhone using a sapphire display cover, with the company ordering 100 of the devices from its assembly partner, Foxconn.

Recently revealed documents indicate GT Advanced has purchased 518 sapphire furnace and chamber systems and ordered another 420. With the machines, the Mesa, Arizona sapphire plant has the ability to produce between 100 and 200 million sapphire displays, enough for its entire line of devices. For reference, Apple sold approximately 150 million iPhones in 2013.

Analyst Ming-Chi Kuo has suggested that due to production shortages with sapphire screens, only certain high end models (64GB 5.5-inch iPhone 6) may use the new glass to start.


Initial rumors suggested the iPhone 6 might have a curved display, but more recent rumors indicate the device will continue to have a flat screen much like the iPhone 5s.

Advancements in LED backlighting may allow Apple to design a thinner, lighter iPhone 6. Apple is reportedly shifting from an 0.6mm LED backlight to a thinner 0.4mm model, giving it a bit of extra room to work with. The increased size of the device (or multiple devices) may also give Apple additional room to spread out components, allowing the company to reduce device thickness even further.

A recent report has indicated the upcoming iPhone could take on a design inspired by both the iPhone 5c and the current iPod nano, adopting the rounded back edges, colorful casings, and button designs of the iPhone 5c with the anodized aluminum body of the nano.

Schematics for a 4.7 and 5.7-inch iPhone surfaced in March, from Japanese magazine MacFan. Said to depict the "iPhone 6c," the schematics showed a flat, bezel-free device with several questionable design elements, including a power button located on the left-top of the device and single LED-flash not in line with the existing pill-shaped True Tone flash.

More sketchy iPhone 6 images were published a week later on Chinese microblogging site Weibo, showing a device with a protruding camera lens and a round flash. The legitimacy of both the images and the schematics remain questionable at this time, but several additional leaks have used the same design elements found in the schematics, including a recent case maker's rendering that shows a thin 6mm chassis and cutouts for an antenna.


The iPhone 5s incorporates a 64-bit A7 28-nanometer chip manufactured by Samsung. Apple's iPhone 6 will reportedly incorporate a 20-nanometer A8 chip from TSMC, which will be both smaller and more energy efficient. Samsung will continue to be involved in the production, however, helping to alleviate some of TSMC's manufacturing load.

The A7 chip marked a 31 percent improvement over the A6 in the iPhone 5, and it is likely that the leap to a 20-nm A8 chip will offer similar increases in performance. The A8 chip is rumored to include both a quad-core 64 bit processor and quad-core graphics and production is said to be underway as of February of 2014. It's believed, however, the A8 may only contain 1GB of RAM, the same as the A7.

Apple recently extended its licensing agreement with Imagination Technologies, the company that provides Apple with the PowerVR graphics and video hardware used in iOS devices. It is likely that the next-generation iPhone will continue to feature the Series6 graphics used in the current iPhone 5s, though future devices may receive the Series 6XT PowerVR GPUs which offer a 50 percent benchmark performance increase compared to previous generation cores.


A recent rumor has suggested that the iPhone 6 may continue to use the 8-megapixel sensor found in the iPhone 5s and the iPhone 5c, while adding other camera improvements.

Apple's iPhone 4s and iPhone 5 also used the same 8-megapixel sensor, but Apple significantly improved camera quality in the iPhone 5s through an increase in pixel size, a larger aperture, a new "True Tone" dual-LED flash and software enhancements, and it is possible the company will follow the same camera improvement strategy in the iPhone 6.

Optical Image Stabilization (OIS) is one way the camera in the iPhone 6 may be improved, and there are reports that will integrate OIS into the iPhone 6 and Apple has been working on striking a deal with InvenSense, a company that manufacturers an OIS gyroscope. Optical Image Stabilization uses motion-tracking in order to compensate for device shakiness, allowing for sharper photos and videos.

Though some sources have pointed towards Optical Image Stabilization for the next iPhone, an April rumor suggested Apple might instead opt for Electronic Image Stabilization in order to incorporate a slimmer camera that will not protrude out of the thin body of the phone. It's not clear what image stabilization method Apple will use in the iPhone 6, but camera improvements have always a focus for the company with each new iPhone.


Apple's iPhone 6 is likely to continue to feature the Touch ID fingerprint sensor first found in the iPhone 5s and a recent rumor indicated that TSMC will produce fingerprint sensors for the device.

Other sensors may be bundled into the iPhone 6 to bring it on par with smartphones from competing companies like Samsung. One analyst has indicated that the iPhone 6 could add a pressure, temperature, and humidity sensor, a feature that would bring the iPhone in line with the Samsung Galaxy S4, a phone that includes similar atmospheric sensors.

According to another analyst report, Apple's next-generation iPhone may also support the 802.11ac Wi-Fi standard that first began appearing in Apple products in 2013. 802.11ac, or "Gigabit" Wi-Fi, offers speeds up to three times as fast as existing 802.11n wireless networks, reaching speeds over 1 Gigabit per second. While 802.11ac technology was not quite ready for the iPhone 5s and the iPhone 5c, Apple Wi-Fi chip supplier Broadcom has recently come out with a new 802.11ac Wi-Fi chip for smartphones.


With the introduction of the iPhone 5c alongside the iPhone 5s, Apple bifurcated its iPhone lineup for the first time. iPhone 6 rumors suggest that Apple will continue with the dual iPhone strategy, producing the iPhone 6 in two different sizes. The Wall Street Journal in January indicated that one iPhone will come with a screen size above 4.5 inches diagonally, while the second will have a display bigger than 5 inches diagonally.

Two lines and two sizes will possibly allow for Apple to continue with its current pricing strategy, offering a full-priced flagship device, a mid-tier lower-cost device, and previous generation devices at an even lower cost. Current rumors suggest that Apple will not continue producing a plastic iPhone, and will instead use metal casings for both phones.

A March report from Reuters suggested that while Apple is indeed working on two iPhones, the larger 5.5-inch version might not be ready for a fall launch due to issues with in-cell display production technology and battery thickness. The 4.7-inch iPhone 6 is said to be entering mass production, with the 5.5-inch version following several months later. KGI Securities analyst Ming-Chi Kuo has made similar claims.


Apple's iOS updates generally happen alongside iPhone launches, which means the iPhone 6 will undoubtedly ship with iOS 8. Not a lot is known about iOS 8, but some rumors have pointed to improvements to Maps and a possible Siri API. While we have seen some iOS 8 activity in our logs, usage remains low, suggesting that development of the operating system is still in the early stages.

A January rumor suggested that iOS 8 will integrate with the upcoming iWatch and will have a heavy focus on health-related applications. Apple is said to be introducing a "Healthbook" app that will track various data points including blood pressure, hydration, heart rate, and other statistics like glucose levels. It may also include enhanced mapping functionality.

Because iOS 7 introduced a major redesign, iOS 8 is said to retain largely the same look, with Apple focusing on adding additional features to the operating system.


As of April 2014, several different alleged iPhone 6 part leaks have surfaced. What could possibly be the front panel from the larger iPhone 6 recently appeared on Chinese microblogging site Weibo, displaying a notably thinner bezel along with familiar cutouts for a front-facing camera, ambient light sensor, ear speaker, and home button.

Alleged iPhone 6 batteries have also surfaced, as have manufacturing molds that are said to be for the iPhone 6. The molds appear to depict a device that is approximately 4.7 inches in size when compared to an iPhone 4s, which is in line with the rumored size for the smaller of the two iPhone 6 models.


Mockups of the iPhone 6 have been surfacing in droves, with the large majority of the models appearing to be based on leaked iPhone 6 schematics. The mockups all show a thinner chassis, slimmer bezels, and redesigned pill-shaped volume buttons. Many also display a relocated sleep/wake button, which may move to the right side of the device for easier one-handed access, and a protruding camera lens.

One of the highest quality mockups to date, said to be based on real machine schematics, displays all of the above mentioned characteristics along with rounded corners, a circular LED flash, and antenna breaks on the rear of the device.

Another high-quality mockup of the 4.7-inch iPhone has been compared to the Galaxy S5, showing how Apple's larger iPhone might stack up to Samsung's flagship offering

Most of the mockups have focused on the 4.7-inch device as it is expected to be released before the larger 5.5-inch version, but one physical iPhone 6 mockup has demonstrated how a 5.5-inch iPhone might look when held.

Multiple cases for the iPhone 6 have also been revealed, mostly coming out of Asia. The cases share design similarities including a larger size and relocated cutouts for the power button. Some rumors have suggested Apple will relocate the phone's power button to the top left or right side of the device in order to better accommodate one-handed use.

We commissioned a rendering based on the same leaked schematics used for many of the case designs and mockups, demonstrating what an edge-to-edge display and a thinner chassis could look like in both sizes.


According to a recent report from Japanese business site Nikkei, the Apple may introduce its larger-screened iPhones as early as September, which is consistent with past year's iPhone releases. The 4.7-inch iPhone is expected to hit the market first around September while the 5.5-inch version won't be available until the very end of the year or early 2015.

Press HERE To Reserve iPhone 6 clone one 1:1 

Back: iPhone 5 Release Date Is Early September 2012 Next: 2014 FiFA World Cup Brazil Groups Winner and The Champion predictions